Cooking range, like every other kitchen appliance is susceptible to breaking down. However, a cold oven can frustrate you easily, especially when you’re looking to cook a meal. Oven can have several problems. Some are those which can be easily cleaned, and others need you to call an oven repair service. So, if your stove is working but the oven seems to be off, here’s what you can do to troubleshoot.
Detecting The Actual Problem
Usually, small things in your oven can cause big issues. So, if your oven doesn’t seem to work well, you should start from the basics.
To start with, you should see if the oven is even plugged in or not. This might seem like an obvious thing, but you should still see the plug if you’ve cleaned or moved your oven recently. So, make sure the oven is properly plugged in.
After checking the plug, you should see if the pilot light of the stove is on. If the light is off, you should consult the manual that came with your oven to turn on the light and fix the issue.
If you’ve checked all the things, and the problem still seems to not working, you’ll have to check the oven. However, before checking, you should make sure that the oven is unplugged, and the stove is cooled down as well.
Check The Wiring
The wiring used in old oven models usually meets down due to the heat generated by excessive current. The worn housing melts down to expose the wires. So, if you notice an exposed wire in or out of your oven, you should call an expert right away.
However, if there’s a broken fuse in your oven, then the problem is probably with another part of your oven. This is majorly caused because of a short circuit. Sudden power outages are the main reason for blowing fuses.
While you can replace blown fuses of an oven easily, they will blow out again if you don’t fix the underlying problem. So, focus on the underlying problem instead of replacing fuses again and again. There are specialized meters which can check different parts of your oven for defects. You can either invest in those meters, or hire an expert to check the errors in your oven and repair it to restore its functionality. Doing the latter might also save you a lot of money that you’d otherwise have to spend on buying different meters and equipment for repair.
It Might Be The Heating Element
Usually, the ovens we use in our houses have two heating elements for different uses. These elements, like every other electronic item in your oven, can wear down over time, in which case they’ll need to be replaced by an appliances technician.
To detect damage in your oven’s heating element, you should see if the element has developed any spots which are different from the regular spots. The element might also look cracked or blistered, or simply broken.
However, keep in mind that you only have to replace the element which isn’t working. So, if only one of the elements is broken, you’ll only have to replace that particular element. However, if both of the elements seem to be not working, you should first see the wiring and see if it’s okay.
The main thing you need to check in this situation is the wiring and fuses.
Check The Control Board
Another thing which can cause the oven to stop working while the stove is still on can be due to a defect in the electronic control board.
No matter what may be the brand of your oven, it will have an electronic control board. This board is responsible for the safety of various different functions of your oven.
So, if the problem seems to be with your electronic control board, it will need to be checked by using various testing equipment. For that reason, you should hire an expert to do the testing, and also the repair. This will ensure the safety of your appliance.
Hiring an appliance repair Springfield expert for any type of repair work is highly recommended as it’ll help avoid any further issues with the appliance.
